Spray-OnCode VWESC

Eurospray Coarse

Name: Eurospray Coarse
Brand: Versus Paint

Coarse sprayed quartz

Spread rate

2.5 kg/m²

Everything about Eurospray Coarse

Description: A heavier sprayed quartz texture with a noticeably more pronounced grain than Eurospray Fine. The hopper-gun application distributes the texture across the surface, giving the wall an even but clearly textured, coarse finish.
Look: Coarse sprayed quartz
Application: Applied using a hopper gun and compressed air
Composition: Quartz based, using a coarser aggregate making it a more pronounced finish
Consumption: 2.5 kg/m².
Colours: Any colour.
Suitability: For internal and external use
Surfaces: On to smooth plaster, mouldings or any curved surfaces, previously painted or any smooth sound surfaces

Deep and bright colours are charged at a higher price (POA).

Technical specification

From the published Versus data sheet, 2019. Figures under review.

Use: Interior and exterior, walls and ceilings.
Substrates: Cement plaster, concrete, gypsum (Rhinolite), steel, glass, OSB board, fibre-cement board (Nutec), wood; also sound previously painted surfaces.
Aggregate: Quartz aggregate.
Weather: Do not apply if rain is expected within 4–6 hours.

Specifier notes

From the published Versus data sheet, 2019. Figures under review.

Spread rates are a guide only; actual rates vary with the surface.
Order the full quantity at once to eliminate batch variance; Versus cannot be held liable for colour variation on insufficient orders.
Signed colour sample panels are required before manufacture.
Maximum recommended application panel: 10 m². Remedial work requires the full panel to be redone.
Scaffold corner-to-corner, or v-joint to v-joint, tape-joint to tape-joint, construction joint to construction joint.
All horizontal surfaces waterproofed with Versus Versa-Proof. Treat all damp first — coatings do not stop damp.
Surface preparation per SABS 1514:1993 and SANS 2001-EM1:2007.
Do not thin premixed coatings — thinning causes colour variation.
Do not apply in direct sunlight or if rain is expected within 4–6 hours.
Drying 12–24 hours is typical for trowel coatings, climate dependent.
Shelf life minimum 12 months unopened. Water based, non-flammable, lowest fire rating.
High-pigment and bright colours fade uniformly over time.
For best results apply by an experienced applicator.