← All finishes
Trowel-OnCode VWSF
Stone Finish
Hand-cast stone texture
Spread rate
5 kg/m²
Category
Trowel-On
The detail
Everything about Stone Finish
- Description
- A highly tactile stone finish created by trowelling a prepared base onto the wall and then casting real stones by hand into the wet surface. The result is a much more pronounced, dimensional stone texture with individual aggregate visibly embedded across the wall.
- Look
- Hand-cast stone texture
- Application
- Paste applied by steel trowel, stones thrown by hand
- Composition
- Natural stone in an acrylic binder
- Consumption
- 5 kg/m².
- Colours
- Natural colour only.
- Suitability
- For internal and external use
- Pack sizes
- 20L bucket (±32 kg) · 300 kg drum
Available in natural colour only, subject to stone availability.
Technical specification
Stone Finish — published specification
From the published Versus data sheet, 2019. Figures under review.
- Composition
- 100% pure acrylic textured plaster finish, using quartz aggregate, various fillers and coloured with iron oxide pigments.
Specifier notes
From the published Versus data sheet, 2019. Figures under review.
- Spread rates are a guide only; actual rates vary with the surface.
- Order the full quantity at once to eliminate batch variance; Versus cannot be held liable for colour variation on insufficient orders.
- Signed colour sample panels are required before manufacture.
- Maximum recommended application panel: 10 m². Remedial work requires the full panel to be redone.
- Scaffold corner-to-corner, or v-joint to v-joint, tape-joint to tape-joint, construction joint to construction joint.
- All horizontal surfaces waterproofed with Versus Versa-Proof. Treat all damp first — coatings do not stop damp.
- Surface preparation per SABS 1514:1993 and SANS 2001-EM1:2007.
- Do not thin premixed coatings — thinning causes colour variation.
- Do not apply in direct sunlight or if rain is expected within 4–6 hours.
- Drying 12–24 hours is typical for trowel coatings, climate dependent.
- Shelf life minimum 12 months unopened. Water based, non-flammable, lowest fire rating.
- High-pigment and bright colours fade uniformly over time.
- For best results apply by an experienced applicator.
Estimate
How much Stone Finish do I need?
Enter your wall dimensions to estimate the quantity — then send it through for an exact quote.
Note: Two-component system — Stone Paste and Stone are supplied separately.
Estimated need
- Total area
- 8.1 m²
- Product (total)
- 56.7 kg
- Stone Paste
- 28.4 kg1 × 20L bucket (±32 kg)
- Stone
- 28.4 kg1 × 20L bucket (±32 kg)
- Order as
- 2 × 20L bucket (±32 kg)
- Total supplied
- 64.0 kg
Product FAQs
Have a question about Stone Finish? Get in touch and we'll help.
Downloads
Where to buy
Visit our Wynberg showroom or contact us for your nearest stockist.
Find your nearest store →


