Menu
Preparation Range Specifications
VERSAFILL
- A versatile flexible ready mixed hard drying filler for patching and fixing surface cracks.
- Interior and exterior cracks and gaps in walls.
- Blowholes in precast concrete.
- Skimming of uneven surface.
- Repairs to correctly primed Rhinolite.
- Defects in wood.
- Repairing cracked window putty.
- Excellent adhesion properties.
- Easy to sand.
- Quick drying
- Excellent paintable surface.
- Suitable for interior and exterior use.
- Sets to a hard finish.
- Contains no toxic substances.
- Appearance: Paste.
- Colors: White
- Solids: 52% by mass.
- Density: 0.75 – 0.80.
- Recommended Dry Film Thickness: 1 – 10 mm.
- Flash Point: Non-flammable.
- Mixing: Stir well before use.
- Thinning: Not recommended, but tap water if required.
- Clean up: Tap water.
- Spreading rate: 1m ²/l @ 1mm thickness.
- Mixing: Stir well before use.
- Thinning: Not recommended, but tap water if required.
- Clean up: Tap water.
- Spreading rate: 1m ²/l @ 1mm thickness.
- Remove all dust, debris, fungal- and algae growth.
- Clean out all holes, cracks and joints with a stiff brush.
- Seal all visible cracks with Versus Versafill and coat with Versus Plaster Primer.
- 1.75 Kgs and 7 Kgs.
- Detailed safety information: refers to the material safety data sheet for this product.
- Do not apply exterior if it looks like rain will occur within 4 – 6 hours of application.
- Drying times will be extended during wet or cold weather conditions.
- This product is ready for use, preferably do not thin.
- Not formulated to fix up structural cracks.
REACTIV DEGREASER - NO spec
- A versatile flexible ready mixed hard drying filler for patching and fixing surface cracks.
- Interior and exterior cracks and gaps in walls.
- Blowholes in precast concrete.
- Skimming of uneven surface.
- Repairs to correctly primed Rhinolite.
- Defects in wood.
- Repairing cracked window putty.
- Excellent adhesion properties.
- Easy to sand.
- Quick drying
- Excellent paintable surface.
- Suitable for interior and exterior use.
- Sets to a hard finish.
- Contains no toxic substances.
- Appearance: Paste.
- Colors: White
- Solids: 52% by mass.
- Density: 0.75 – 0.80.
- Recommended Dry Film Thickness: 1 – 10 mm.
- Flash Point: Non-flammable.
- Mixing: Stir well before use.
- Thinning: Not recommended, but tap water if required.
- Clean up: Tap water.
- Spreading rate: 1m ²/l @ 1mm thickness.
- Mixing: Stir well before use.
- Thinning: Not recommended, but tap water if required.
- Clean up: Tap water.
- Spreading rate: 1m ²/l @ 1mm thickness.
- Remove all dust, debris, fungal- and algae growth.
- Clean out all holes, cracks and joints with a stiff brush.
- Seal all visible cracks with Versus Versafill and coat with Versus Plaster Primer.
- 1.75 Kgs and 7 Kgs.
- Detailed safety information: refers to the material safety data sheet for this product.
- Do not apply exterior if it looks like rain will occur within 4 – 6 hours of application.
- Drying times will be extended during wet or cold weather conditions.
- This product is ready for use, preferably do not thin.
- Not formulated to fix up structural cracks.
UNIVERSAL UNDERCOAT
- A solvent based interior and exterior general purpose undercoat for use under decorative topcoats.
- Apply between primers and alkyd enamel topcoats on exterior interior wood, hardboard and metal.
- As a basecoat over correctly primed plaster to follow with enamel paint.
- Ideal for use on suitably primed interior and exterior surfaces.
- Apply between gloss enamels and emulsion topcoats, to improve intercoat adhesion for interior and exterior.
- Excellent sealing: Prevents absorption of more expensive top coats.
- Excellent adhesion.
- Provide a smooth base for topcoats
- Good levelling properties and easy brushing.
- en primers and alkyd enamel topcoats on exterior interior wood, hardboard and metal.
- As a basecoat over correctly primed plaster to follow with enamel paint.
- Ideal for use on suitably primed interior and exterior surfaces.
- Apply between gloss enamels and emulsion topcoats, to improve intercoat adhesion for interior and exterior.
- Type: Alkyd.
- Appearance: Matt/Low sheen.
- Colors: White and Pastel colors.
- Solids: 63-64% by mass.
- Density: 63% – 64%.
- Recommended Dry Film Thickness: 1 coat at minimum 30 µm and maximum
- Viscosity at 25℃. : 30-35 Krebs µ. Secs. (Sheen Cup)
- Flash Point: 34℃.
- Mixing: Stir well before use.
- Method: Short nap mohair roller or brush.
- Thinning: Not recommended, but tap water if required. Thinning reduces the opacity.
- Clean up: Mineral Turpentine.
- Spreading rate: 8 – 10 m ²/l depending on surface porosity and profile.
- Conditions: Avoid painting in wet or cold weather. Minimum temp 8℃
- Drying time: Touch dry 3-4 hours. Hard dry 16-18 hours at 25 degrees.
- Requirements:1 coat
- New Surfaces must be sound, clean, dry and primed with an appropriate primer.
- Previously Painted Surfaces: Must be in sound condition. Apply 1 coat Versus Universal Undercoat and sand smooth after drying.
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
- 5 Litres and 20 Litres.
- Detailed safety information: refers to the material safety data sheet for this product.
- Do not apply directly to unprimed surfaces.
- Drying times will be extended during wet or cold weather conditions.
- Must be over coated for protection.
VERSABOND BONDING LIQUID
- Clear Resin Based Bonding Liquid.
- For use as a clear alkali resistant sealer on gypsum plaster, cement plater and porous, friable concrete surfaces.
- May also be used as a sealer for Masonite hardboard.
- Type: Urethane.
- Drying Time: Surface dry 2 Hours at
- Hard dry 8 Hours at 25°ͨ.
- Colors: Clear
- Solids: ± 30%.
- Specific Gravity: 0.80-0.82
- Spreading Rate: 11-12m²/l (typical) depending on surface porosity and type.
- Viscosity 15-18 Sec F4 @ 25°ͨ.
- Clean Up: Mineral turps.
- Ready for use with roller or brush. Application by brush ensures penetration.
- New Surfaces all surfaces must be clean and dry. Moisture content of new plaster must be less than 12%
- Previously Painted Surfaces must be brushed down and any loose flaking paint must be removed.
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
- 5 litres and 20 litres
- Do not apply on metal surfaces.
- Do not paint in wet or cold weather. (Minimum 5ºC.)
- Should be over coated within 48 hours to ensure adequate adhesion of the subsequent coats.
PLASTER PRIMER - SOLVENT BASED
- An alkali resistant solvent based penetrating primer for porous, friable and chalky surfaces.
- A good quality alkali resistant primer for use on new dry surfaces such as cement plaster, gypsum plaster, porous concrete, rhinolite and glass stone.
- For bonding and sealing on powdery, friable, very porous or stained substrates.
- For application on fire or nicotine stained areas.
- Ideal for both interior and exterior surfaces.
- Excellent penetrating and binding properties.
- Pigmented white – time saving when top coating.
- Excellent adhesion.
- Excellent alkali resistant properties. Protects subsequent coats against alkali attack.
- Penetration into absorbent and chalky surfaces.
- Excellent stain blocking properties.
- Once sealed can be top coated with a wide range of Versus water and solvent based coatings.
- Type: Modified Alkyd Resin.
- Appearance: White.
- Colors: White.
- Density: 1.31 – 1.33.
- Viscosity at 25ºC: 65 – 70 Kµ.
- Specific Gravity: 1.31 – 1.33.
- Solids: 75% by Mass.
- Flash Point: Flammable at 34ºC.
- Mixing: Stir well before use.
- Method: Brush or roller.
- Thinning: Mineral Turpentine.
- Clean up: Mineral Turpentine.
- Spreading rate: 10m ²/l depending on surface porosity and profile.
- Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
- Drying time: Touch dry 4 hours. Hard dry 18 hours at 25 degrees.
- Recoating time: 18 hours.
- Requirements: 1 to 2 coats.
- New Surfaces must be sound, clean and dry before painting. The moisture content must not be more than 15%. Apply 1 coat of Versus Plaster Primer. Work the product well into the surface.
- Previously painted surfaces: All powdery surfaces must be washed down and all loose and flaking paint must be removed. Apply 1 coat of Versus Plaster Primer. Work the product well into the surface.
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
- 1Litre – 5 Litres – 20 Litres.
MULTI-SURFACE PRIMER - no spec
- An alkali resistant solvent based penetrating primer for porous, friable and chalky surfaces.
- A good quality alkali resistant primer for use on new dry surfaces such as cement plaster, gypsum plaster, porous concrete, rhinolite and glass stone.
- For bonding and sealing on powdery, friable, very porous or stained substrates.
- For application on fire or nicotine stained areas.
- Ideal for both interior and exterior surfaces.
- Excellent penetrating and binding properties.
- Pigmented white – time saving when top coating.
- Excellent adhesion.
- Excellent alkali resistant properties. Protects subsequent coats against alkali attack.
- Penetration into absorbent and chalky surfaces.
- Excellent stain blocking properties.
- Once sealed can be top coated with a wide range of Versus water and solvent based coatings.
- Type: Modified Alkyd Resin.
- Appearance: White.
- Colors: White.
- Density: 1.31 – 1.33.
- Viscosity at 25ºC: 65 – 70 Kµ.
- Specific Gravity: 1.31 – 1.33.
- Solids: 75% by Mass.
- Flash Point: Flammable at 34ºC.
- Mixing: Stir well before use.
- Method: Brush or roller.
- Thinning: Mineral Turpentine.
- Clean up: Mineral Turpentine.
- Spreading rate: 10m ²/l depending on surface porosity and profile.
- Conditions: Avoid painting in wet or cold weather. Minimum temp 8º C
- Drying time: Touch dry 4 hours. Hard dry 18 hours at 25 degrees.
- Recoating time: 18 hours.
- Requirements: 1 to 2 coats.
- New Surfaces must be sound, clean and dry before painting. The moisture content must not be more than 15%. Apply 1 coat of Versus Plaster Primer. Work the product well into the surface.
- Previously painted surfaces: All powdery surfaces must be washed down and all loose and flaking paint must be removed. Apply 1 coat of Versus Plaster Primer. Work the product well into the surface.
- Keep containers properly sealed.
- Store away from direct heat, sun and severe cold.
- 1Litre – 5 Litres – 20 Litres.
PLASTER KEY
- Versus Plaster Key is Universal water based bonding aid.
- Versus Plaster Key has been designed specifically for use in the building industry to bond sand/cement plaster and Gypsum plaster to smooth surfaces.
- Improves non-structural bond of cement and Gypsum plasters.
- No more hacking and chipping of smooth surfaces.
- Bonding to sound PVA surfaces.
- Easy to use.
- Low VOC.
- Surfaces should be free of loose particles, scaling of flaking materials. Wire brush and rinse the surface if necessary.
- Soffits and vertical surfaces- Coat the prepared surfaces with Versus Plaster Key after dust etc. has been removed and apply a scratch coat whilst the Versus Plaster Key is still wet. Allow the scratch coat to dry and then plaster in the usual manner.
- Where Gypsum based plaster is used apply the Versus Plaster Key to the prepared surface and plaster straight on to the wet Plaster Key finishing off in a single operation. Versus Plaster Key can be added to the plaster mix (10% of water content) to obtain a stronger bond Versus Plaster Key can be applied by brush or roller coverage ± 10m² per litre.
GALVANIZED IRON CLEANER
A non-abrasive acidic type cleaner for Galvanized Steel surfaces.
- For cleaning all new and oxidized (weathered) Galvanized Steel prior to priming.
- Type: Aqueous cleaning agent containing phosphoric acid.
Appearance: Thin liquid.
Colours: Blue-Green
Water Based: This product is water based.
Low VOC: This product has low VOC
Flash Point: >100°ͨ
Mixing: Shake or stir well before use.
Method: Bristle brush or Spray application.
Thinning: No thinning needed product is ready to use.
Clean Up: Water.
Conditions: Surface temperature Min 10°ͨ Max 40°ͨ ambient temperature Max 40°ͨ.
Drying Time: In coastal areas prime the cleaned surface preferably within 2hours or at
the least 4 hours and in other areas the same day to prevent
recontamination of the surface and the formation of rust.• Apply by bristle brush or spray application to manageable areas at a time leave in contact with surface for at least 1 minute.
• Scrub off with bristle brush or broom and water to remove all trails of Versus Galvanized Iron Cleaner and other contaminations.
• Check that the surface is water break free, if not or if still appears dirty re-apply
Versus Galvanized Iron Cleaner and repeat the above procedure allow to dry.
Prime the cleaned surface as soon as possible to recontamination of the surface and the formation of rust.
- 5 litres and 20 litres
Do not allow drying on surface if dry, re-apply and rinse off immediately.
• Do not apply with steel or wire brush.CAUTION: Contains acid, traces of acid and cleaning agent remaining on the
surface will reduce the adhesion of the primer. Versus Galvanized Iron Cleaner must therefore be thoroughly removed by brushing and rinsing.
GALVANIZED IRON PRIMER
A Versatile, premium quality anti corrosive etch primer for exterior galvanized.
- Primer for correctly prepared Galvanized iron and non-ferrous metal.
- Excellent adhesion and corrosion resistance.
- Quick drying- recoat in 4 hours.
- Provides an excellent primed surface for a wide range of decorative topcoats.
- No added Lead.
Appearance: Matt to Low Sheen
Colour: Cream
Binder Type: BVP/Phenolic
Density at 23°ͨ: Approx. 1.03
Solid Content: By Wight Approx. 38%
By Volume Approx. 21%
Packaged Viscosity: 23°ͨ Approx. 70KU
Spreading Rate: B5 to 10 ²m per litre depending on surface porosity, profile
And application method
Recommended DFT per coat: Min 20µm Max 40µm
Recommended WFT per coat: Min 95µm Max 190µm
Flash Point: 12°ͨ
- Mixing: Sir until homogeneous with a flat paddle
Application Conditions: Surface temperature between 10-35°ͨ Relative
Humidity between 10-85% or 2°ͨ above dew point minimum
Application Methods: Brush, Rollers or spray
Thinning: Thinning not recommended. For conventional spray
applications thin with 5 to 10% Etch Primer thinner
Drying Time: Touch dry 1 hour at 23°ͨ
(Recoating times will be extended during cool, wet or humid conditions)
Cleaning of equipment: After use, remove as much product as possible, and then clean immediately with Etch Primer Thinner
Substrates: Well prepared Galvanized iron and non-ferrous metals Ensure surfaces are pre-cleaned.
Coats Required: Apply one to two coats Versus Galvanized Iron Primer depending on the severity of the conditions.
Top Coat: Over- coat primer with two coats of selected Versus decorative top coat.
Precautions: Do not apply during cold (below 10°ͨ) or wet weather.
Not suitable for direct application to powdery or friable
surfaces whether previously painted or not.
Do not apply over rusty unprepared metal surfaces.
Quick drying- avoid application to very tot surfaces.
Not designed to withstand prolonged natural weathering.
It should be over coated with conventional coatings within
18-24 hours, particularly in marine atmosphere.
RUST CONVERTER
A high quality water based Versus Rust Converter with Primer properties designed to coat and prevent further or future corrosion.
- Versus Rust Converter is intended for corroded surfaces or prevention of corrosion to new metal surfaces as a converter and primer.
- Versus Rust Converter is ideal for any rusted metals e.g. Galvanized, Chromadec roof sheeting factory I-beams or structure steel.
- Excellent adhesion and corrosion resistance.
- Quick drying- recoat in 4 hours.
- Provides an excellent primed surface for a wide range of decorative topcoats.
- No added Lead.
- Detailed Safety Information: Refers to Material Safety Data Sheet.
- Do not apply to bare metal surfaces.
- Drying time will be extended during wet and cold weather conditions.
- Appearance: Clear Milky
- Colour: Clear Milky
- Solids: + 62%
- Density: 1.33
- Flash Point: Non-Flammable
- Viscosity: 75/79ku
- PH: 8.5/9.5
Mixing: Al ready mixed, Stir when required especially when the product has been standing for a long period of time.
Thinning: Not necessary
Application Method: Brush, Roller or Spray Application.
Clean-up: Water based products to be cleaned with clean tap water
Spreading rate: per coat 7-10m²/l all metals
Drying Time: Touch Dry 30min at 23°ͨ
Dry to Handle: 1 Hour at 23°ͨ
Over coating: 2 Hour at 23°ͨ
Full Cure: 7 Days
- Keep container properly sealed after use.
- Keep away from direct sunlight, heat and sever cold.
- 5 litres and 20 litres
RUST CONVERTER
A high quality water based Versus Rust Converter with Primer properties designed to coat and prevent further or future corrosion.
- Versus Rust Converter is intended for corroded surfaces or prevention of corrosion to new metal surfaces as a converter and primer.
- Versus Rust Converter is ideal for any rusted metals e.g. Galvanized, Chromadec roof sheeting factory I-beams or structure steel.
- Excellent adhesion and corrosion resistance.
- Quick drying- recoat in 4 hours.
- Provides an excellent primed surface for a wide range of decorative topcoats.
- No added Lead.
- Detailed Safety Information: Refers to Material Safety Data Sheet.
- Do not apply to bare metal surfaces.
- Drying time will be extended during wet and cold weather conditions.
- Appearance: Clear Milky
- Colour: Clear Milky
- Solids: + 62%
- Density: 1.33
- Flash Point: Non-Flammable
- Viscosity: 75/79ku
- PH: 8.5/9.5
Mixing: Al ready mixed, Stir when required especially when the product has been standing for a long period of time.
Thinning: Not necessary
Application Method: Brush, Roller or Spray Application.
Clean-up: Water based products to be cleaned with clean tap water
Spreading rate: per coat 7-10m²/l all metals
Drying Time: Touch Dry 30min at 23°ͨ
Dry to Handle: 1 Hour at 23°ͨ
Over coating: 2 Hour at 23°ͨ
Full Cure: 7 Days
- Keep container properly sealed after use.
- Keep away from direct sunlight, heat and sever cold.
- 5 litres and 20 litres
Experience the difference for yourself.
Transform your space today with our high-quality, premium paints and expert services. Elevate your walls to a level of sophistication that will leave a lasting impression. Contact Versus Paint now and experience the difference for yourself. Let’s create a masterpiece together.
Talk to us
011 885 3136
Send us email
info@versuspaint.co.za
Trust Versus Paint to bring sophistication and style to every brush stroke.
Everything we do is done with a sense of purpose and passion. We know what it takes to make a statement, and we do it with flair.
Join us in the world of luxury, where only the best will do. Choose Versus Paint and experience the Lux Life in all its glory.